CHEAPEST Full Body Tracking on Quest 2 with Webcam Only! Tutorial & Impressions
How to get cheap full body tracking in VRChat on Quest 2 with just a webcam and Driver4VR, step by step, plus how well it works.
With full body tracking, your avatar moves with your real body: you see your legs walk, kick and dance in the game, which is more fun and much more immersive. Normally it takes an expensive setup. Three trackers and a dongle can already cost $360, and you may want more for your whole body. Driver4VR does something similar with webcam full body tracking, and it works on standalone headsets like the Quest 2. Here’s how well it works and how to set it up.
A part of this video was sponsored by Surfshark. It wasn’t about Driver4VR, and nobody told me what to say.
How webcam full body tracking works, and how well
Plug in a webcam, turn it on, and the software detects your body automatically. It does that well: my room is full of stuff, and it still knew where my arms and legs were. You then connect it to VRChat on your Quest 2 using something called OSC.
You still need a PC for now, but it doesn’t need high specs. Any low-spec PC or laptop should work.
It tracks pretty well, but a webcam has no depth sensor, so it has limits:
- You can kick, but if you face the webcam it can’t see your knees bend.
- Turn to the side and it can’t see your legs stretch either.
- Other moves don’t look great. It doesn’t work as well as full body tracking with physical trackers.
Still, some tracking is better than none. The software costs $18 and you can use any webcam you have lying around, so I think it’s great if you’re on a budget.
What you need
- A PC. Try whatever you have; it doesn’t need high specs.
- A webcam. Or use your iPhone or Android phone as a webcam with an app like DroidCam.
- Driver4VR, from Steam.
- A Quest 2 with VRChat installed.
Step-by-step setup
Step 1: Connect your webcam
Plug it in if you haven’t, check that it works, then close any software that might be using it.
Step 2: Get Driver4VR
Install Steam if you don’t have it, launch it, find Driver4VR in the store, and buy and install it.
Step 3: Find your Quest 2’s IP address
Put on your Quest 2 and make sure it’s on the same network as your PC (the same Wi-Fi or router). In Quick Settings, open Wi-Fi, click the network you’re connected to, scroll down, click Advanced and write down the IP address. Don’t worry, it’s only your local IP address.
Step 4: Launch Driver4VR in Quest OSC mode
In your Steam library, launch Driver4VR. It asks how you want to start it, because it also works with PC VR games. For standalone, pick the second option, the Quest OSC VRChat beta. The first time, you may see a pop-up saying it could not register the driver. That’s for PC VR, so ignore it.
Step 5: Set up the webcam tracking
- Set the body tracking source to webcam deep learning.
- Enter your Quest 2’s IP address from step 3.
- In the drop-down next to camera, pick your webcam.
- Click Start at the top left. It can take a while. Wait until the button says Stop, and don’t click the window before that, because it sometimes freezes.
- Click Show Preview to see your webcam image. I use my webcam in portrait mode so it can see my whole body; if you do too, rotate the preview here.
- Check that your body is detected.
Step 6: Turn on OSC in VRChat
Launch VRChat on your Quest 2, stand in front of a mirror in your home world and pick an avatar that supports full body tracking (most of the standard ones do). Open the quick menu by holding the Y or B button, and use the joystick on that controller to navigate. Go to Options, then OSC, and make sure it’s enabled.
To check the connection, go to Options > OSC > OSC Debug. You’ll see a bunch of squares. If the numbers move when you move your body, data is coming through.
Step 7: Turn on full body tracking and auto center
- Close that menu and open the main menu by pressing Y or B once.
- Open Settings with the cog icon at the bottom right.
- Scroll down to the tracking and IK settings (click the arrow if they’re collapsed).
- Turn on FBT and set trackers to System. White squares, your trackers, now appear in the mirror. They don’t have to line up with your feet exactly.
- If the squares aren’t level with the floor while you stand, go to Driver4VR on your PC and adjust the skeleton scale height until they are.
- Stand in front of the webcam with your feet about shoulder width apart, side by side.
- Back in VRChat’s tracking settings, look at your webcam and click Auto Center.
- Lift one foot. If the matching square moves, you’re good. If your feet are swapped, click Auto Center again until it’s right.
Step 8: Calibrate your avatar
In the same tracking and IK settings, click Calibrate FBT. Your avatar goes into a T-pose. Copy it in real life and press both triggers. If your avatar ends up under the ground or bent over, set your height in the settings too.
That’s it. Your settings are saved, so next time you only need to auto center and calibrate in VRChat.
Other ways to use Driver4VR
I focused on webcams here, but Driver4VR also works with Bluetooth devices and even an older motion-sensing camera, if you still have one lying around. I made a tutorial for that years ago. It may be a little outdated, but it might still work.
Is cheap webcam full body tracking worth it?
For $18 and a webcam you already own, yes, if you’re on a budget. It won’t match physical trackers: it misses depth, knee bends and side-on movement. But seeing your legs move in VRChat for that price is a fun upgrade, and the setup is easier than it looks.


